|
 |
| DA90811 | $13.00 |  | | 1968-1972 Chevelle, Malibu, Monte Carlo, and El Camino clutch rod boot (D-1495Z) |
|
|
 |
| DM90800 | $475.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed Conversion kit. All the hardware needed to change any Chevrolet G-body vehicle to a manual transmission (Pads for pedals included). You supply the bell housing, clutch fork, return spring, clutch, pressure plate, flywheel, and transmission. The kit has everything else. This is a kit made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
 |
| DM90801 | $39.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino Original (4) Four Speed and (3) Three Speed shifter boot (GM Restoration Part) (Can be used with any (5) Five Speed or (6) Six Speed shifter) |
|
|
 |
| DM90802 | $19.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed and (3) Three Speed shifter plastic cover. Cover mounts to the floor over carpet and finishes off the shifter. Use the above shift boot to finish it off. |
|
|
 |
| DM90809 | $22.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed and (3) Three Speed shifter boot retaining ring and mounting screws. Holds the shifter boot and plastic cover to the floor. Use the above shift boot and cover to finish it off. |
|
|
| |
| DM90803 | $18.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed bell housing dust cover |
|
|
| |
| DM90804 | $99.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed clutch pedal. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
| |
| DM90805 | $99.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed brake pedal. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
| |
| DM90810 | $6.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino Automatic, (4) Four Speed, (5) Five Speed, or (6) Six Speed - Clutch and Brake Pedal Pivot Sleeves. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. Need one for automatic cars and 2 for manual cars. - each |
|
|
| |
| DM90806 | $98.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed Z bar. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
| |
| DM90807 | $12.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed clutch pedal stop. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
| |
| DM90808 | $24.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed Z bar frame bracket. This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
 |
| DM90811 | $24.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed Clutch Boot Assembly. Boot that installs on the fire wall. Upper clutch rod from clutch pedal goes through it to the Z-bar. (GM Restoration Part). This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
 |
| DM90812 | $39.00 | | | 1978-1988 Monte Carlo, Malibu, and El Camino (4) Four Speed, (5) Five Speed, or (6) Six Speed Upper Clutch Rod. Upper clutch rod from clutch pedal and attaches to the Z-bar. (GM Restoration Part). This part is made of the same kind and quality from GM. This is not a cheap imitation like some out there that are not made to the correct shape and made of inferior material. |
|
|
| |
| DM60140 | $7.00 | | | 1978-1980 Malibu, El Camino, ( Monte Carlo with manual conversion ) Brake or Clutch pedal pad - manual |
|
|
| |
| DA90730 | $229.00 | | | 1968-1972 Monte Carlo, Chevelle, Malibu, and El Camino power steering quick ratio gear box - professionally rebuilt by a 40 year experience company known for its quality (get $75 refund if you send your old one back) |
|
|
| |
| DB90730 | $179.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu, and El Camino power steering quick ratio gear box - professionally rebuilt by a 40 year experience company known for its quality (get $25 refund if you send your old one back) |
|
|
 |
| DM90030 | $179.00 | | | 1983-1988 Monte Carlo SS (can be used on Malibu, El Camino, and Standard Monte Carlos as well) power steering quick ratio gear box - professionally rebuilt by a 40 year experience company known for its quality (get $25 refund if you send your old one back) |
|
|
| |
| DM90330 | CALL | | | 1980-1988 Monte Carlo, El Camino, Malibu power steering pump w/reservoir - rebuilt |
|
|
| |
| DM90530 | $179.00 | | | 1978-1979 Monte Carlo, El Camino, and Malibu power steering stock gear box - professionally rebuilt by a 40 year experience company known for its quality (get $25 refund if you send your old one back) |
|
|
| |
| DM90630 | CALL | | | 1978-1979 Monte Carlo, El Camino, Malibu power steering pump - professionally rebuilt by a 40 year experience company known for its quality (get $25 refund if you send your old one back) |
|
|
| |
| DM90430 | $179.00 | | | 1980-1988 Monte Carlo, El Camino, and Malibu power steering stock gear box - professionally rebuilt by a 40 year experience company known for its quality (get $25 refund if you send your old one back) |
|
|
 |
| DM90833 | $199.00 | | | 1982-1988 Monte Carlo, El Camino, and Malibu steering lower intermediate shaft section for steering box with rag joint - new - OEM |
|
|
 |
| DM90832 | $279.00 | | | 1982-1988 Monte Carlo, El Camino, and Malibu steering intermediate shaft for steering box with rag joint and universal joint and cover (complete assembly) - new - OEM |
|
|
| |
| DM90831 | $29.00 | | | 1982-1988 Monte Carlo, El Camino, and Malibu steering intermediate shaft cover - new - OEM |
|
|
| |
| DM90830 | $49.00 | | | 1982-1988 Monte Carlo, El Camino, and Malibu steering intermediate shaft for steering box with rag joint and universal joint and cover (complete assembly) - used |
|
|
| |
| DM90031 | $149.00 | | | 1983-1988 Monte Carlo SS (will fit on 1978-1987 El Camino & Malibu) swaybar front & rear set - used - when avail. |
|
|
 |
| DM90082 | $79.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu strut rod set - used (Fig. C) |
|
|
 |
| DM90185 | $179.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu Heavy Duty front chassis brace (strut rods). Powder coated black. Helps stop frame flex. Combined with part number DM91401, you can virually take all of the unneccessary flex out of the frame. This part is an improvement over the optional F41 suspension package ( which came with only 2 rods) in that it ties both sides of the frame together. A must have for any G-body car that did not come with the F41 suspension. |
|
|
 |
| DA91103C | $559.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Tubular upper A-arm package. Upgrade your GM A-Body's front suspension with the use of our Tubular A-Arms. Our Tubular A-Arms are designed to adapt the use of taller GM F or B-Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. Disc brakes are easily upgraded with factory 11" or 12" rotors available from F or B Body vehicles. These arms feature Tig welded construction, and greasable polyurethane bushings, upper and lower ball joints, and chromoly offset cross shafts. Note: Arms do not work with factory spindles! Spindles required are 70-76 GM F-Body, or 78+ GM B-Body. Spindles will lower vehicle 3/4" and widen track width 3/8" per side. Please consult a Hotchkis Representative with any specific questions regarding this conversion. |
|
|
 |
| DA91104 | CALL | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Tubular lower A-arm package. In development. Available spring 2007. |
|
|
 |
| DA9110002 | $1,239.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 11" BRAKE PACKAGE. Upgrade your GM A-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and reliability. The Hotchkis brake package includes 1103 Tubular A-Arms, outer tie rod ends, upper and lower ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. Please consult a Hotchkis Representative with any specific questions regarding this conversion. |
|
|
 |
| DA9110003 | $1,239.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 11" BRAKE PACKAGE. Upgrade your GM A-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and reliability. The Hotchkis brake package includes 1103 Tubular A-Arms, outer tie rod ends, upper and lower ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. Please consult a Hotchkis Representative with any specific questions regarding this conversion. |
|
|
 |
| DA9112002 | $1,289.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 12" BRAKE PACKAGE. Upgrade your GM A-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and reliability. The Hotchkis brake package includes 1103 Tubular A-Arms, outer tie rod ends, upper and lower ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. Please consult a Hotchkis Representative with any specific questions regarding this conversion. |
|
|
 |
| DA9112003 | $1,289.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 12" BRAKE PACKAGE. Upgrade your GM A-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and are reliability. The Hotchkis brake package includes 1103 Tubular A-Arms, outer tie rod ends, upper and lower ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. Please consult a Hotchkis Representative with any specific questions regarding this conversion. |
|
|
 |
| DM91160 | $45.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE HEAT SHIELD. |
|
|
 |
| DA91202 | $239.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE UPPER TRAILING ARMS - Hotchkis Performance upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware included. |
|
|
 |
| DA91202AA | $289.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE DOUBLE ADJUSTABLE UPPER TRAILING ARMS - Hotchkis Performance adjustable upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. The adjustable design allows for pinion angle adjustments to correct drive line vibrations or to improve launches. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware included. |
|
|
 |
| DA91302 | $239.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE LOWER TRAILING ARMS - Hotchkis Performance lower trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, sway bar mounts and a powder coated finish. Black Powder coat. No hardware inlcuded. |
|
|
 |
| DA91402 | $119.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TRAILING ARM MOUNT BRACES - Hotchkis Performance Trailing Arm Mount braces are designed to reinforce the upper cross member of your vehicle for added strength and performance. High horsepower cars can bend or break the upper frame cross member. Protect your vehicle and your performance with this simple bolt in application. Braces include grade 8 hardware, and feature tig welded construction, durable black powder coat, and a adjustable design. Will significantly takes flex out of the chassis for a more controled and solid ride. |
|
|
| |
| DA91601 | $49.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TIE ROD SLEEVES - Enhance steering precision with our Machined Tie Rod Adjusting Sleeves. They feature machined hex bodies, jam nuts and are finished in durable gloss black powder coat. 5/8" Thread. |
|
|
| |
| DA91612 | $59.00 | | | 1971-1977 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TIE ROD SLEEVES - Enhance steering precision with our Machined Tie Rod Adjusting Sleeves. They feature machined hex bodies, jam nuts and are finished in durable gloss black powder coat. 11/16" Thread. |
|
|
 |
| DA91702 | $19.00 | | | 1968-1977 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TRAILING ARM HARDWARE. 1/2" Hardware Pack, Use With 1202.1202a,1203,1203a,1206,1206a,1302. Note: Pictures are for representation only. Product may vary. |
|
|
 |
| DA91803 | $599.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE REAR SUSPENSION PACKAGE, INCLUDES DA91202, DA91302, DA91402, DA91702. Our upper and lower trailing arms work together to positively locate and control the rear axle. Launches are quicker, smoother and more consistent by eliminating wheel hop. Cornering and overall stability are dramatically improved through increased roll stiffness and sway bar effectiveness. The fabricated trailing arms are constructed from one piece of .120" wall TIG welded steel tubing and include greasable polyurethane bushings. Trailing arm mount braces and hardware are also included. |
|
|
| |
| DA91803AA | $659.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE ADJUSTABLE REAR SUSP PACKAGE, INCLUDES DA91202AA, DA91302, DA91402, DA91702 - Our upper and lower trailing arms work together to positively locate and control the rear axle. Launches are quicker, smoother and more consistent by eliminating wheel hop. Cornering and overall stability are dramatically improved through increased roll stiffness and sway bar effectiveness. The fabricated trailing arms are constructed from one piece of .120" wall TIG welded steel tubing and include greasable polyurethane bushings. Trailing arm mount braces and hardware are also included. Features adjustable upper trailing arms in this package. |
|
|
 |
| DA91901 | $269.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block SPRING SET, 1" DROP - Lower your GM A-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 500 lb/in, Rear 135 lb/in. Motor: Small Block, Pontiac 400 or Big Block with Aluminum Heads and Aluminum Manifold. Applications: GM A-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
 |
| DA91901F | $139.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block FRONT SPRINGS, 1" DROP (COIL "A" in picture) - Lower your GM A-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 500 lb/in, Motor: Small Block, Pontiac 400 or Big Block with Aluminum Heads and Aluminum Manifold. Applications: GM A-Body |
|
|
 |
| DM91901R | $139.00 | | | 1968-1988 Monte Carlo, El Camino,Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR SPRINGS, 1" DROP (COIL "B" in picture) - Lower your GM A or G-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Rear 135 lb/in. Double Pig Tail Coil Applications: GM A or G-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
 |
| DM931750 | $99.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR AIR BAG KIT - Improve launches, and weight capacity by inserting these air bags inside your rear springs. Air bags work much better than air shocks offering a better ride and by still allowing a performance shock to be used. A must for wagons or El Caminos. Sold as a pair with air lines. Please Note: These bags are now only produced in RED. (We may have a few Black ones left, call to inquire on availability). |
|
|
 |
| DA91916 | $269.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Big Block SPRING SET, 1" DROP - Lower your GM A-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 520 lb/in, Rear 135 lb/in. Motor: Big Block. Applications: GM A-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
 |
| DA91916F | $139.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block FRONT SPRINGS, 1" DROP (COIL "A" in picture) - Lower your GM A-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 520 lb/in, Motor: Big Block Applications: GM A-Body |
|
|
|
| DM91901R | $139.00 | | | 1968-1988 Monte Carlo, El Camino,Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR SPRINGS, 1" DROP (COIL "B" in picture) - Lower your GM A or G-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Rear 135 lb/in. Double Pig Tail Coil Applications: GM A or G-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
|
| DM931750 | $99.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR AIR BAG KIT - Improve launches, and weight capacity by inserting these air bags inside your rear springs. Air bags work much better than air shocks offering a better ride and by still allowing a performance shock to be used. A must for wagons or El Caminos. Sold as a pair with air lines. Please Note: These bags are now only produced in RED. (We may have a few Black ones left, call to inquire on availability). |
|
|
 |
| DA92202 | $325.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE SWAY BAR SET, 1 3/8" FRONT BAR (H), 1" REAR BAR (S) - Reduces body roll, increases safety, and improves handling performance. Rear bars also help improve traction. Lightweight hollow construction on the front bar. Solid on the rear bar. Includes greasable polyurethane bushings, stainless U-brackets, end links, brackets, and all necessary hardware. Powdered coated parts and tuned for your car. |
|
|
 |
| DA92202F | $179.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE FRONT SWAY BAR, 1 3/8" (Hollow) - Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and feature lightweight hollow construction and include greasable polyurethane bushings, end links, brackets, and all necessary hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. |
|
|
| |
| DM92202R | $149.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE REAR SWAY BAR, 1" (Solid) - Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and include hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. |
|
|
| |
| DA92282 | $439.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE EXTREME SPORT SWAY BAR SET, 1 3/8" FRONT BAR (H), 1 5/16" REAR BAR (H) - Reduces body roll, increases safety, and improves handling performance. The Hotchkis Extreme Sport Rear Sway Bar, is designed to eliminate the hard mounted factory design rear bar, allowing for better suspension articulation in extreme usage vehicles. This system allows the rear sway bar to slightly pivot reducing fatigue and stress placed on the sway bar in the factory design. Specs: 1 5/16" Tubular Bar w two stiffness settings. Includes axle mounts, Stainless u-bolts, greasable bushings, and end links. Lightweight hollow construction. Front bar includes greasable polyurethane bushings, stainless U-brackets, end links, brackets, and all necessary hardware. Powdered coated parts and tuned for your car. |
|
|
|
| DA92202F | $179.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE FRONT SWAY BAR, 1 3/8" (Hollow) - Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and feature lightweight hollow construction and include greasable polyurethane bushings, end links, brackets, and all necessary hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. |
|
|
 |
| DA92282R | $269.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE EXTREME SPORT REAR SWAY BAR 1 5/16" REAR BAR (H) - Reduces body roll, increases safety, and improves handling performance. The Hotchkis Extreme Sport Rear Sway Bar, is designed to eliminate the hard mounted factory design rear bar, allowing for better suspension articulation in extreme usage vehicles. This system allows the rear sway bar to slightly pivot reducing fatigue and stress placed on the sway bar in the factory design. Specs: 1 5/16" Tubular Bar w two stiffness settings. Includes axle mounts, Stainless u-bolts, greasable bushings, and end links. Lightweight hollow construction. Powdered coated parts and tuned for your car. |
|
|
 |
| DA970010012 | $159.00 | | | 1968-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE HPS SHOCK 1000 FRONT SHOCK - The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold in pairs. |
|
|
 |
| DM971010009 | $159.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE HPS SHOCK 1000 REAR SHOCK - The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold in pairs. |
|
|
 |
| DA980005 | $1,295.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Big Block TVS Total Vehicle Suspension KIT INCLUDES DA91601, DA91803AA, DA91916, and DA92202. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 Gm A-Body Motors: Big Block (Aluminum Heads Use DA980006) Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
 |
| DA980006 | $1,295.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block TVS Total Vehicle Suspension KIT INCLUDES DA91601, DA91803AA, DA91901, and DA92202. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 GM A-Body Motors: Small Block, Pontiac 400, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA980007 | $1,299.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Big Block TVS Total Vehicle Suspension KIT INCLUDES DA91612, DA91803AA, DA91916, and DA92202. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 Gm A-Body Motors: Big Block (Aluminum Heads Use DA980008) Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA980008 | $1,299.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block TVS Total Vehicle Suspension KIT INCLUDES DA91612, DA91803AA, DA91901, and DA92202. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 GM A-Body Motors: Small Block, Pontiac 400, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA989005 | $1,399.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Big Block EXTREME TVS Total Vehicle Suspension KIT INCLUDES DA91601, DA91803AA, DA91916, and DA92282. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 Gm A-Body Motors: Big Block (Aluminum Heads Use DA989006) Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA989006 | $1,399.00 | | | 1968-1970 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block EXTREME TVS Total Vehicle Suspension KIT INCLUDES DA91601, DA91803AA, DA91901, and DA92282. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 GM A-Body Motors: Small Block, Pontiac 400, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA989007 | $1,410.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Big Block EXTREME TVS Total Vehicle Suspension KIT INCLUDES DA91612, DA91803AA, DA91916, and DA92282. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 Gm A-Body Motors: Big Block (Aluminum Heads Use DA989008) Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DA989008 | $1,410.00 | | | 1971-1972 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE Small Block EXTREME TVS Total Vehicle Suspension KIT INCLUDES DA91612, DA91803AA, DA91901, and DA92282. The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1968-1970 GM A-Body Motors: Small Block, Pontiac 400, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
 |
| DB91206 | $239.00 | | | 1973-1977 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE UPPER TRAILING ARMS - Hotchkis Performance upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware included. |
|
|
 |
| DB91206AA | $289.00 | | | 1973-1977 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE DOUBLE ADJUSTABLE UPPER TRAILING ARMS - Hotchkis Performance adjustable upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. The adjustable design allows for pinion angle adjustments to correct drive line vibrations or to improve launches. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware included. |
|
|
| |
| DB1306 | $239.00 | | | 1973-1977 Chevelle, Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE LOWER TRAILING ARMS - Hotchkis Performance lower trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, sway bar mounts and a powder coated finish. Black Powder coat. No hardware included. |
|
|
 |
| DM91101C | $539.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TUBULAR A-ARM PACKAGE - Upgrade your GM A/G-Body's front suspension with the use of our Tubular A-Arms. Our Tubular A-Arms are designed to adapt the use of taller GM F or B-Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. Disc brakes are easily upgraded with factory 11" or 12" rotors available from F or B Body vehicles. These arms feature Tig welded construction, and greasable polyurethane bushings, upper ball joints, a single stainless steel heat shield and chromoly offset cross shafts. Note: Arms do not work with factory spindles! Spindles required are 70-76 GM F-Body, or 78+ GM B-Body. Spindles will lower vehicle 3/4" and widen track width 3/8" per side. |
|
|
 |
| DM9110001 | $1,179.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 11" BRAKE PACKAGE - Upgrade your GM A/G-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and reliability. The Hotchkis brake package includes 1101 Tubular A-Arms, upper ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. |
|
|
 |
| DM9112001 | $1,229.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE COMPLETE 12" BRAKE PACKAGE - Upgrade your GM A/G-Body's front suspension and brakes with the use of our Brake Package. Our Tubular A-Arms are designed to adapt the use of taller GM-F Body spindles allowing for improved suspension geometry by creating a negative camber curve and increased caster. The disc brakes offer OEM quality and reliability. The Hotchkis brake package includes 1101 Tubular A-Arms, upper ball joints, 70-76 F-body spindles, brake lines, rotors, calipers and brake pads. Note: Spindles will lower vehicle 3/4" and widen track width 3/8" per side. |
|
|
|
| DM91160 | $45.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE HEAT SHIELD. |
|
|
 |
| DM91201 | $239.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE UPPER TRAILING ARMS - Hotchkis Performance upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware is included. |
|
|
 |
| DM91201AA | $289.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE DOUBLE ADJUSTABLE UPPER TRAILING ARMS - Hotchkis Performance adjustable upper trailing arms improve traction, reduce wheel hop, and improve handling and stability. The adjustable design allows for pinion angle adjustments to correct drive line vibrations or to improve launches. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, and a powder coated finish. Black Powder coat. No hardware is included. |
|
|
 |
| DM91301 | $239.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE LOWER TRAILING ARMS - Hotchkis Performance lower trailing arms improve traction, reduce wheel hop, and improve handling and stability. Designed as direct replacements for weak stock trailing arms, Hotchkis trailing arms feature Tig welded construction from one piece of parent material, quiet operating greasable polyurethane bushings, sway bar mounts and a powder coated finish. Black Powder coat. - No hardware in included. |
|
|
 |
| DM91401 | $119.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TRAILING ARM MOUNT BRACES - Hotchkis Performance Trailing Arm Mount braces are designed to reinforce the upper cross member of your vehicle for added strength and performance. High horsepower cars can bend or break the upper frame cross member. Protect your vehicle and your performance with this simple bolt in application. Braces include 4 long bolts, 4 locking nuts, and 8 washers, all are grade 8 hardware, and feature tig welded construction, durable black powder coat, and a adjustable design. Will significantly takes flex out of the chassis for a more controled and solid ride. Pictures are for representation only. Product may vary. |
|
|
 |
| DM91601 | $49.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TIE ROD SLEEVES - Enhance steering precision with our Machined Tie Rod Adjusting Sleeves. They feature machined hex bodies, jam nuts and are finished in durable gloss black powder coat. 5/8" Thread. |
|
|
 |
| DM91701 | $19.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TRAILING ARM HARDWARE (This particular kit comes with 4 bolts, 4 locking nuts, and 8 washers) - 12mm grade 8 Hardware Pack, Use With 1204,1204R,1204A,1304,1304R,1301,1301R.Note: Pictures are for representation only. Product may vary. |
|
|
 |
| DM91802 | $599.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE REAR SUSPENSION PACKAGE, INCLUDES DM91201, DM91301, DM91401, DM91701 - Our upper and lower trailing arms work together to positively locate and control the rear axle. Launches are quicker, smoother and more consistent by eliminating wheel hop. Cornering and overall stability are dramatically improved through increased roll stiffness and sway bar effectiveness. The fabricated trailing arms are constructed from one piece of .120" wall TIG welded steel tubing and include greasable polyurethane bushings. Trailing arm mount braces and hardware are also included. |
|
|
| |
| DM91802AA | $659.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE ADJUSTABLE REAR SUSP PACKAGE, INCLUDES DM91201AA, DM91301, DM91401, DM91701 - Our upper and lower trailing arms work together to positively locate and control the rear axle. Launches are quicker, smoother and more consistent by eliminating wheel hop. Cornering and overall stability are dramatically improved through increased roll stiffness and sway bar effectiveness. The fabricated trailing arms are constructed from one piece of .120" wall TIG welded steel tubing and include greasable polyurethane bushings. Trailing arm mount braces and hardware are also included. Features adjustable upper trailing arms in this package. |
|
|
 |
| DM91902 | $269.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE SPRING SET, 1" DROP - Lower your GM G-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 600 lb/in, Rear 135 lb/in. Motor: Small Block, or Big Block with Aluminum Heads and Aluminum Manifold. Applications: GM G-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
 |
| DM91902F | $139.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE FRONT SPRINGS, 1" DROP (COIL "A" in picture) - Lower your GM G-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Front 600 lb/in, Motor: Small Block or Big Block with Aluminum Heads and Aluminum Manifold. Applications: GM G-Body Also Used on 82-92 F-Body For 1" Drop. |
|
|
|
| DM91901R | $139.00 | | | 1968-1988 Monte Carlo, El Camino,Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR SPRINGS, 1" DROP (COIL "B" in picture) - Lower your GM A or G-Body 1" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Specs: 1" Lowered Rear 135 lb/in. Double Pig Tail Coil Applications: GM A or G-Body Sedans Note: Wagons and El Camino's should not use rear springs without the use of 31750 air bag kit. |
|
|
|
| DM931750 | $99.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE REAR AIR BAG KIT - Improve launches, and weight capacity by inserting these air bags inside your rear springs. Air bags work much better than air shocks offering a better ride and by still allowing a performance shock to be used. A must for wagons or El Caminos. Sold as a pair with air lines. Please Note: These bags are now only produced in RED. (We may have a few Black ones left, call to inquire on availability). |
|
|
 |
| DM92201 | $325.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE SWAY BAR SET, 1 3/8" FRONT BAR (H), 1" REAR BAR (S) - Reduces body roll, increases safety, and improves handling performance. Rear bars also help improve traction. Lightweight hollow construction on the front bar. Solid on the rear bar. Includes greasable polyurethane bushings, stainless U-brackets, end links, brackets, and all necessary hardware. Powdered coated parts and tuned for your car. (Price will increase on 2-1-07) |
|
|
 |
| DM92201F | $179.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE FRONT SWAY BAR, 1 3/8" (Hollow) - Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and feature lightweight hollow construction and include greasable polyurethane bushings, end links, brackets, and all necessary hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. |
|
|
 |
| DM92201R | $149.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE REAR SWAY BAR, 1" (Solid) - Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and include hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. |
|
|
 |
| DM970010001 | $159.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE HPS SHOCK 1000 FRONT SHOCK - The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold in pairs. |
|
|
|
| DM971010009 | $159.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu HOTCHKIS PERFORMANCE HPS SHOCK 1000 REAR SHOCK - The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold in pairs. |
|
|
 |
| DM980009 | $1,245.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TVS Total Vehicle Suspension KIT INCLUDES, DM91601, DM91802, DM91902, DM92201 - The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components and end up with a poor ride quality that often results when using components made by diferent manufacturers. This system is engineered and will give you the ride you always wished your car had. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Rear Suspension Package. Applications: 1978-1988 GM G -Body Motors: Small Block, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
| |
| DM980009AA | $1,295.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu HOTCHKIS PERFORMANCE TVS Total Vehicle Suspension KIT INCLUDES, DM91601, DM91802AA, DM91902, DM92201 - The Hotchkis TVS is a all inclusive kit that has been designed and tested as a system. No need to mix and match components and end up with a poor ride quality that often results when using components made by diferent manufacturers. This system is engineered and will give you the ride you always wished your car had. The TVS system includes Sport Coils, Sport Sway Bars, Heavy Duty Tie Rod Sleeves, and a Adjustable Rear Suspension Package. Applications: 1978-1988 GM G -Body Motors: Small Block, or Big Block with alum. heads, alum manifold. Note: This kit lowers the vehicle an avg of 1" from orig factory ride height. |
|
|
|
| DM90185 | $179.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu Heavy Duty front chassis brace (strut rods). Powder coated black. Helps stop frame flex. Combined with part number DM91401, you can virually take all of the unneccessary flex out of the frame. This part is an improvement over the optional F41 suspension package ( which came with only 2 rods) in that it ties both sides of the frame together. A must have for any G-body car that did not come with the F41 suspension. |
|
|
| |
| DA90187 | $225.00 | | | 1968-1972 Chevelle, Malibu, El Camino, and Monte Carlo 2" Drop Spindles (Made for stock OEM equiped disc brakes. Can be ordered as a part of a 11" to 13" rotor package kit from SSBC.) |
|
|
 |
| DM90087 | $199.00 | | | 1979-1988 Monte Carlo, El Camino, & Malibu Bell Tech 2" drop spindles. (Direct factory bolt on. Lowers car without sacrificing ride or handling. Not a direct fit for 78 vehicles. You will have to change your rotors and bearings and outer tie rods.) |
|
|
 |
| DM90387 | $175.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu Bell Tech 1 1/2" drop rear springs (COIL "A" in picture). Set of 2. |
|
|
 |
| DM90187 | $99.00 | | | 1979-1988 Monte Carlo, El Camino, & Malibu Bell Tech Nitro front shock to work with Bell Tech 2" drop spindles. Price is for a pair. |
|
|
 |
| DM90287 | $99.00 | | | 1968-1988 Monte Carlo, El Camino,Chevelle, & Malibu Bell Tech Nitro rear shock to work with Bell Tech 2" drop spindles. Price is for a pair. |
|
|
 |
| DM90186 | $32.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu Bell Tech spring spacers for front springs - each (requires 2) |
|
|
 |
| DM90286 | Call | | | 1978-1988 Monte Carlo, El Camino, & Malibu Bell Tech spring spacers for front springs - set of 2 |
|
|
| |
| DM90188 | $99.00 | | | 1968-1987 El Camino extra load rear springs (COIL "D" in picture) - sold in pairs |
|
|
 |
| DM90088 | $79.00 | | | 1968-1988 Monte Carlo, El Camino, Chevelle, & Malibu Stock Rear springs (COIL "C" in picture) - sold in pairs (specify Monte Carlo, Monte Carlo SS, or Malibu) |
|
|
 |
| DM90089 | $99.00 | | | 1978-1988 Monte Carlo, El Camino & Malibu Stock Front springs (COIL "B" in picture) - sold in pairs (Specify Monte Carlo, Monte Carlo SS, El Camino, or Malibu) |
|
|
| |
|
