|
 |
| DA00214 | $875.00 |  | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel and rocker panels - one piece (D-1462YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00216 | $689.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel - one piece (D-1462XA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00217 | $279.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino one piece Floor Pan - (D-1462) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00200 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00201 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00202 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00203 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00204 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00205 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00206 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00207 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00210 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00208 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00209 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino 4 speed Tunnel, manual transmission only w/o console (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
 |
| DA00218 | $79.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, & Malibu (2 door or 4 door) Rear Seat Panel (D-1462L) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00228 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00229 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461ZA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00221 | $85.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - REAR (D-1461X) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00222 | $2.50 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu, and El Camino Galvanized Floor Plug - each |
|
|
| |
| DB00200 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00201 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00202 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00203 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00200 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) LH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00201 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) RH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20022 | $199.00 | | | 1970-1972 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20023 | $199.00 | | | 1970-1972 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20022 | $160.00 | | | 1976-1977 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20023 | $160.00 | | | 1976-1977 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20125 | $175.00 | | | 1981-1988 Monte Carlo LH Quarter panel skin - (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20126 | $175.00 | | | 1981-1988 Monte Carlo RH Quarter panel skin - (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20123 | $795.00 | | | 1981-1988 Monte Carlo LH Quarter panel - OEM - (100%) - no factory primer - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20124 | $299.00 | | | 1981-1988 Monte Carlo LH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20024 | $299.00 | | | 1981-1988 Monte Carlo RH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20021 | $1,399.00 | | | 1981-1988 Monte Carlo Super Rust Repair kit (Includes some used and some new reproduction parts) - Includes DM20024 & DM20124 quarter panels & wheel houses; DM00200 & DM00201 floor pans, DM30147 & DM30148 Rocker panels, DM30141, DM30142, DM30143, DM30144 Inner and Outer door bottoms - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30147 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
 |
| DA30148 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30149 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30150 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30147 | $49.00 | | | 1978-1988 Monte Carlo LH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30148 | $49.00 | | | 1978-1988 Monte Carlo RH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10031 | $149.00 | | | 1986-1988 Monte Carlo LH LS fender - used, when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10032 | $149.00 | | | 1986-1988 Monte Carlo RH LS fender - used, when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10033 | CALL | | | 1986-1988 Monte Carlo LS LH fender - New - NOT for SS or standard Monte Carlo (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) - {CURRENTLY OUT OF STOCK} |
|
|
 |
| DM10034 | $159.00 | | | 1986-1988 Monte Carlo LS RH fender - New - NOT for SS or standard Monte Carlo(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) - {ONLY 2 LEFT} |
|
|
| |
| DM10333 | $1,500.00 | | | 1981-1988 Monte Carlo LH & RH fender set - OEM - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10035 | $159.00 | | | 1981-1988 Monte Carlo LH fender - New reproduction - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
 |
| DM10036 | $159.00 | | | 1981-1988 Monte Carlo RH fender - New reproduction - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10162 | $149.00 | | | 1981-1988 Monte Carlo LH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10163 | $149.00 | | | 1981-1988 Monte Carlo RH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10137 | $149.00 | | | 1980 Monte Carlo LH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10138 | CALL | | | 1980 Monte Carlo RH fender - used (when available)(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20251 | $169.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Trunk lid - new reproduction - black factory primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20351 | $75.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Trunk lid - used (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20352 | $46.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Deck lid filler panel - new reproduction - black factory primer (D-1489C)(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20150 | $299.00 | | | 1978-1980 Monte Carlo Trunk Lid - used - aluminum - when avail. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20251 | $499.00 | | | 1981-1988 Monte Carlo Trunk Lid - USED - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20051 | $599.00 | | | 1983-1988 Monte Carlo SS Trunk Lid - Used - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20052 | $499.00 | | | 1986-1987 Sale!!! (Normally $599, now on sale for $499 for a limited time) Monte Carlo SS Aerocoupe Trunk Lid - Used - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20053 | $999.00 | | | 1986-1987 Sale!!! (Normally $1199, now on sale for $999 for a limited time) Monte Carlo SS Aerocoupe Trunk Lid - New - OEM - Limited Supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA40002 | $79.00 | | | 1968-1972 Chevelle, Malibu, El Camino, Monte Carlo lower windshield channel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM40008 | $399.00 | | | 1981-1988 Monte Carlo Hard Top Roof panel - NEW - OEM - Limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30141 | $39.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu LH Inner door bottom panel 2-door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30142 | $39.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu RH Inner door bottom panel 2-door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30143 | $45.00 | | | 1981-1988 Monte Carlo LH Outer lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30144 | $45.00 | | | 1981-1988 Monte Carlo RH Outer lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30742 | $249.00 | | | 1978-1980 Monte Carlo RH door. Roll up window and manual locks. Straight door with very minor rust in 3" of pinch weld at very front. Bottom of doors and drain holes are very solid. Still a very solid door. Perfect outer skin. (Interior door panels, exterior aluminum trim, and door mirrors are NOT included.) (only one left) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM30744 | $999.00 | | | 1981-1985 Monte Carlo SS (will fit on a standard Monte Carlo) LH & RH used doora. Comes will all latches, handles, door glass, and window regulators. Doors has power windows and locks. (Interior door panels, exterior aluminum trim, and door mirrors are NOT included.) (only one set) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM30239 | CALL | | | 1978-1988 Monte Carlo, SS, or LS, El Camino, and Malibu used doors. LH or RH. Rust free and straight. Comes will all latches, handles, door glass, and window regulators. Interior door panels and door mirrors are NOT included. Inquire. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10057 | $199.00 | | | 1981-1988 Monte Carlo Hood - reproduction (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10058 | $199.00 | | | 1981-1988 Monte Carlo Stock Hood - used (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10025 | $399.00 | | | 1981-1988 OVERSTOCK SALE!!! Monte Carlo or Monte Carlo SS 2" Cowl Induction Hood - Steel (Normally $449...Limited quantity for this year) (There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
